Call Today


 
 

Valve Networking

DeviceNet Valve Position Monitoring

Products

Main Product Info
Manufacturer: Moniteur Devices 
Description:
Moniteur VPCs with encapsulated DeviceNet
interface cards adapt your on/off automated valves to an advanced DeviceNet valve network. Money and time will be saved as installation and maintenance are streamlined with reduced wiring and improved system diagnostics.

Based on the CAN protocol, the DeviceNet protocol was developed by Allen Bradley to provide industry with a simple and cost effective method of networking field devices. Moniteur supplies a full range of accessories including cable and quick- disconnect connectors to simplify installation.

 

Moniteur's Advanced DeviceNet Platform Improves Reliability
The Network Card. A full function encapsulated network card includes the following benefits:
Encapsulated electronics and position sensors ensure reliability in corrosive, humid and dirty environments.
Hall effect position sensors designed for the card and provide optimum stability in
areas of high vibration.
Two transistor outputs with a combined output of 4.8w @ 24VDC are available for your solenoid valves and allow many standard DC NAMUR valves to be used, avoiding special "low power" valves
High visibility LEDs are located on-board for local indication of on -board sensors, auxiliary inputs, outputs and network state.
Two additional inputs are optional for local pressure or temperature switches.
The Enclosure Platform. Moniteur's platform is available in a wide variety of enclosure materials to match your hazardous or corrosive environment and is designed to provide long-term reliability.
Housings in Aluminum or SuperTough Zytel Thermoplastic for General Purpose or Hazardous Areas
Moniteur’s patented Loc-Ring Cam and Shaft Retention System ensures sensing accuracy and a multi-million cycle life of the physical platform.
DIN 4-pin Female Micro or 5-pin Mini plug connectors can be fitted to the conduit entries of the enclosures to speed installation in general purpose areas.
Moniteur's industry-preferred indicator has a rated minimum life of 1,000,000 cycles. With indicators still in service after 9 million cycles, you're assured of long-term reliability.
DeviceNet Network Features
Each network supports up to 64 nodes or addresses
125K, 250K, and 500K bit/sec.
1640ft. maximum trunk length
Thick and Thin cable types
Trunkline / Dropline topology
Supports online node insertion and removal
Intelligent Part Number System - Specify Your Asi Valve Monitor

A

M

Y

B

-

5

S

2

0

-
DN7

1

2

3

4

-

5

6

7

8

1 - Enclosure Type

4 - Bearing

Ex-proof Nema 7,9 Aluminum

A

Bronze

B
General Purpose Aluminum Nema 4
F

303 Stainless

S
Zytel Thermolastic Nema 4
R

5 - Shaft

2 - Cover

Standard 303 SS

1

With Moniteur

M

Standard 316 SS

3

Flat Cover

F

NAMUR 303 SS

5

3 - Moniteur

NAMUR 316 SS

7

No Indicator

N

LONG NAMUR 303 SS

E

Black / Yellow

Y

LONG NAMUR 316 SS

G

3-way path O

O

6 - Switch Type

3-way path T

T

On Board Hall Effect Sensors

S

3-way path F

F

7 - Sensor Quantity

2

4-way path S

S

2

2

180 degree T

1

8 - Conduit

Green / White

G

(2) F 3/4" NPT (A)

0

Red / White

R

(2) F 3/4" + (1) F 1/2" NPT (A)

6

Blue / White

B
(2) F 1/2" NPT (F, R)

0

Green / Red

A
(3) F 1/2" NPT (F, R)

6

Red / Green

C

Network Card
   

DeviceNet, 2 Transistor Outputs

-DN7
Additional Advantages of In-Plant Networking

Drastically Reduced Installation Costs - Wiring and installation time are reduced, yielding a cost saving up to 40% versus conventional methods.

Reduced Maintenance Costs and Increased System Reliability - Components require less maintenance and are designed to work "one way" only. Built-in diagnostic functions allow components to be continuously monitored.

Faster Start-Up - Set-up is simpler and diagnostic functions speed troubleshooting.

Simplified Plant Wiring - Automated valves can be inter-connected in any configuration. Utilizing 4 wires eliminates wiring "spaghetti" of older schemes.

 

 
Ask A Question
Name:
Phone:
Email:
Comments or Questions
I've used Specialty Valve & Controls since 1995. Their service is unmatched.
Evan Jacobson
more testimonials ›
Valve News

Site Usage Policy 

Specialty Valve & Controls | 3001 Griffith Street, Charlotte, NC 28203 | Phone 704-522-9873, Fax 704-522-9875

© 2012 Specialty Valve & Controls | Admin | Site by Paradigm

Site Ensemble CMS Copyright © 2012 Paradigm New Media, LLC. All rights reserved.